描述
信号纯度决定了雷达、收发器、ADC/DAC和组件测试等应用中的测量质量。凭借其低相位噪声和超低相位噪声选项提升包络相位噪声性能。再加上优异的谐波和杂散性能，MG362x1A信号发生器提供业界优秀的整体信号纯度性能，使客户能够进行更精确的测量。
MG362x1A具有内置铷频率参考选项，可提供原子钟频率稳定性。此外，客户还可以通过将内部恒温晶振（OCXO）参考锁定到外部GNSS/GPS信号来获得卓越的频率稳定性。卓越的频率稳定性使其成为计量和高速时钟应用的理想信号发生器。
AM、FM/PM和脉冲调制功能使其能够产生大范围的复杂模拟调制信号。AM/FM、AM/PM或FM/脉冲的同时调制可能产生复杂的调制波形，信号发生器还内置了广泛的信号模拟脉冲雷达测试功能。
MG362x1A提供可选的现场电平和频率校准功能。这使得在您方便的情况下验证和确保仪器的频率和电平精度变得非常容易。这是一个实用功能，也提高了仪器的可用性。
MG362x1A具有7英寸的触摸屏，以及前面板上的键盘和按键。前面板上的四个USB 3.0端口可以连接到各种设备，如内存设备和安立的USB电源传感器。标准驱动程序，如IVI。NET和IVI-C以及SCPI命令的支持远程控制编程，快速高效。
简要规格
| 参数 | 规格 |
| 频率范围 | 9 kHz to 20/43.5 GHz |
| 频率分辨率 | 0.001 Hz |
| SSB相噪 | -136 dBc/Hz (typ) and -140 dBc/Hz (measured) @ 10 GHz output, 10 kHz offset |
| Internal time base stability – Aging | < ±2 x 10E-8 per year with option 0003 < ±1 x 10E-9 per year with option 0056 |
| Reference frequency input/output | 10 MHz, 100 MHz and 1.6 GHz |
| 输出功率 | -130 dBm to +20 dBm (20 GHz standard output) -130 dBm to +18 dBm (43.5 GHz, standard output) |
| Level accuracy and flatness | +/- 1 dB (43.5 GHz) |
| Harmonics (20/43.5 GHz) | -58 dBc |
| Non harmonics (20/43.5 GHz) | -63 dBc |
| 调制 | AM, FM, PM and Pulse |
| Pulse modulation: min pulse width | <10 ns (Unleveled) |
| Pulse modulation: Rise/Fall times | 5 ns (typical) |
| LF signal Generator waveforms | Sine, square, pulse, triangle, ramp, GN/UN noise |
| Frequency sweep modes | Step, List |
| Frequency sweep width | 9 kHz to full frequency range (step, list) |
| Power sweep | Step and List |
| Power sweep resolution | 0.01 dB/step |
订货信息
| 型号 | 说明 |
| MG362x1A-0001 | Rack Mount with Slides (Cannot be ordered with Option 11) |
| MG362x1A-0002 | Mechanical Step Attenuator, 110 dB |
| MG362x1A-0003 | Low Phase Noise and High Stability (Required for Option 13) |
| MG362x1A-0009 | Rear Panel K Connector RF Output |
| MG362x1A-0011 | Rack Mount without Slides (Shelf Mount) |
| MG362x1A-0012 | Amplitude, Frequency and Phase Modulation, Internal/External (Requires Option 27 ) |
| MG362x1A-0013 | Ultra Low Phase Noise (Requires Option 3) |
| MG362x1A-0015 | High Power Output |
| MG362x1A-0018 | On-site Level and Frequency Calibration (Requires Option 66 and MA24330A/MA24350A USB power sensor, sold separately) |
| MG362x1A-0023 | Option 23, Premium Phase Noise, CW (Requires Options 3 and 13) (Available on model MG36221A only) |
| MG362x1A-0026 | Pulse Modulation, Internal/External (Requires Option 27) |
| MG362x1A-0027 | Modulation Hardware (Requires Option 12, 26, or both for functionality) |
| MG362x1A-0029 | Front Panel Modulation Input/Output Access (Requires Option 27) |
| MG362x1A-0056 | Ultra Stability Time Base (Requires Option 3 or 13) |
| MG362x1A-0066 | GNSS Atomic Clock Receiver (Requires option 3 or 13) |
| MG362x1A-0097 | Accredited Calibration |
| MG362x1A-0098 | Standard Calibration |
| MG362x1A-0099 | Premium Calibration |
x- Designation varies with model number
产品手册
产品系列
|
型号
|
频率
|
切换速度
|
输出电平
|
SSB相位噪声
|
|
|---|---|---|---|---|---|
 |
MG362x1A RF/Microwave Signal Generator |
9 kHz to 20/43.5 GHz | 5 ms | Min: -130 dBm (with step attenuator) Max: +21 dBm (10 GHz, std) +30 dBm (10 GHz, with high power opt.) |
-136 dBc/Hz (typ.) (10 GHz, 10 kHz offset) |
 |
MG3710E 矢量信号发生器 |
100 kHz — 2.7 GHz 100 kHz — 4 GHz 100 kHz — 6 GHz |
≤600 µs | Min: -144 dBm (with High power opt.) Max: +30 dBm (with low power opt.) |
<-131 dBc/Hz (typ.) (1 GHz, 20 kHz offset) |
|
|
MG3740A 模拟信号发生器 |
100 kHz — 2.7 GHz 100 kHz — 4 GHz 100 kHz — 6 GHz |
≤600 µs | Min: -144 dBm (with High power opt.) Max: +30 dBm (with low power opt.) |
<-131 dBc/Hz (typ.) (1 GHz, 20 kHz offset) |
|
|
MG3690C 射频/微波信号发生器 |
0.1 Hz — 70 GHz 0.1 Hz — 500 GHz |
5 ms | Min: -120 dBm (with step attenuator) Max: +19 dBm (10 GHz, std) +26 dBm (10 GHz, with high power opt.) |
-108 dBc/Hz (typ.) (40 GHz, 10 kHz offset) |
