描述
非常适用于实验室以及生产过程中的高要求信号分析任务
R&S®FSVA3000信号和频谱分析仪的分析带宽为1 GHz，相位噪声为–127 dBc/Hz，动态范围高，具备满足5G NR等高要求测量应用所需的一切。其测量速度快，易用性强，是高要求信号分析的理想仪器。
为 5G 和其他无线标准做好准备
R&S®FSVA3000 信号与频谱分析仪非常适用于在研发、系统测试、验证和生产应用中分析无线通信信号。凭借 400 MHz 分析带宽，它可同时捕获四个相邻的 5G NR 载波。使用专用的 5G NR 信号分析选件，分析 28 GHz 条件下的 100 MHz 载波时误差矢量幅度低于 1%。
一流的性能和特性
分析带宽高达 1 GHz，具有出色的动态范围和低相位噪声
无线、航空航天和国防以及组件制造领域的许多测量应用都需要相应仪器具有低相位噪声、宽分析带宽以及高动态范围。R&S®FSVA3000 信号与频谱分析仪非常适用于无线通信系统及其组件的生产与验证应用，以及航空航天和国防领域的维修与维护应用。
高速分析
快速测量，实现高效生产
自动生产组件、模块和设备，需要进行频谱测量和信号解调。R&S®FSVA3000 信号与频谱分析仪可迅速执行复杂测量。
增强型计算机功能选件提供四核 CPU 以加快数字信号解调。该选件还增添了内部 PCIe 3.0 总线系统以快速传输测量数据。在基于云的测试系统中，10 Gbit/s LAN 接口选件可快速将 I/Q 数据传输至网络。
简要参数
| Frequency | ||
| Frequency range | R&S®FSVA3004 | 10 Hz to 4 GHz (2 Hz to 4 GHz with R&S®FSV3-B710 option) |
| R&S®FSVA3007 | 10 Hz to 7.5 GHz (2 Hz to 7.5 GHz with R&S®FSV3-B710 option) | |
| R&S®FSVA3013 | 10 Hz to 13.6 GHz (2 Hz to 13.6 GHz with R&S®FSV3-B710 option) | |
| R&S®FSVA3030 | 10 Hz to 30 GHz (2 Hz to 30 GHz with R&S®FSV3-B710 option) | |
| R&S®FSVA3044 | 10 Hz to 44 GHz (2 Hz to 44 GHz with R&S®FSV3-B710 option) | |
| Aging of frequency reference | 1 × 10–6 per year | |
| with R&S®FSV3-B4 option | 1 × 10–7 per year | |
| Bandwidth | standard filter | 1 Hz to 10 MHz |
| Resolution bandwidths | RRC filter | 18 kHz (NADC) 24.3 kHz (TETRA) 3.84 MHz (3GPP) 4.096 MHz |
| channel filter | 100 Hz to 5 MHz | |
| video filter | 1 Hz to 10 MHz | |
| I/Q demodulation bandwidth | standard | 28 MHz |
| with R&S®FSV3-B400 option | 400 MHz | |
| with R&S®FSV3-B600 option | 600 MHz | |
| with R&S®FSV3-B1000 option | 1 GHz for f_carrier > 7.5 GHz | |
| 400 MHz for f_carrier ≤ 7.5 GHz | ||
| Phase noise (with R&S®FSV3-B710 option) | 1 GHz carrier | |
| 1 kHz offset | < –122 dBc/Hz | |
| 10 kHz offset | < –127 dBc/Hz | |
| 100 kHz offset | < –127 dBc/Hz | |
| 1 MHz offset | < –140 dBc/Hz | |
| Displayed average noise level (DANL) | 1 GHz | –153 dBm (typ.) |
| DANL with preamplifier (R&S®FSV3-B24 option) | 50 MHz ≤ f < 7.5 GHz | –167 dBm (typ.) |
| Intermodulation | ||
| Third-order intercept (TOI) | 1 GHz | > 17 dBm, typ. 20 dBm |
| Total measurement uncertainty | 2 GHz | 0.29 dB |
订货信息
| 型号 | 订货号 | 说明 |
| R&S FSVA3004 | 1330.5000.05 | Signal and spectrum analyzer, 10 Hz to 4 GHz1) |
| R&S FSVA3007 | 1330.5000.08 | Signal and spectrum analyzer, 10 Hz to 7.5 GHz1) |
| R&S FSVA3013 | 1330.5000.14 | Signal and spectrum analyzer, 10 Hz to 13.6 GHz1) |
| R&S FSVA3030 | 1330.5000.31 | Signal and spectrum analyzer, 10 Hz to 30 GHz1) |
| R&S FSVA3044 | 1330.5000.44 | Signal and spectrum analyzer, 10 Hz to 44 GHz1) |
| R&S FSV3-B1 | 1330.5700.02 | Side carrying handles |
| R&S FSV3-B3 | 1330.3765.02 | Audio demodulator |
| R&S FSV3-B4 | 1330.3794.02 | OCXO frequency reference |
| R&S FSV3-B5 | 1330.3820.02 | Additional interfaces |
| R&S FSV3-B6 | 1330.3913.02 | 10 Gbit/s LAN interface requires R&S FSV3-B114 |
| R&S FSV3-B10 | 1330.3859.02 | External generator control |
| R&S FSV3-B11 | 1330.3865.02 | YIG preselector bypass |
| R&S FSV3-B40 | 1330.4103.02 | 40 MHz analysis bandwidth |
| R&S FSV3-B200 | 1330.4132.02 | 200 MHz analysis bandwidth |
| R&S FSV3-B25 | 1330.4078.02 | Electronic attenuator, 1 dB steps |
| R&S FSV3-B114 | 1330.4910.02 | Enhanced computing power |
| R&S FSV3-B28V | 1330.6664.02 | Noise source control via BNC |
| R&S FSV3-K703 | 1330.7502.02 | 1 GHz reference |
| R&S FSV3-B710 | 1346.4950.xx(xx = 05/08/14/31/44) | Enhanced performance requires R&S FSV3-B114 |
| R&S FSV3-K6 | 1346.3330.02 | Pulse measurements |
| R&S FSV3-K7 | 1330.5022.02 | AM/FM/PM modulation analysis |
| R&S FSV3-K9 | 1346.3676.02 | Power sensor support |
| R&S FSV3-K10 | 1330.5039.02 | GSM/EDGE/EDGE Evolution/VAMOS measurements |
| R&S FSV3-K18 | 1346.3347.02 | Amplifier measurements |
| R&S FSV3-K18D | 1346.3353.02 | Direct DPD measurements requires R&S FSV3-K18 |
| R&S FSV3-K18F | 1346.4408.02 | Frequency response measurements requires R&S FSV3-K18 |
| R&S FSV3-K30 | 1330.5045.02 | Noise figure measurements |
| R&S FSV3-K40 | 1330.5051.02 | Phase noise measurements |
| R&S FSV3-K70 | 1330.5074.02 | Vector signal analysis |
| R&S FSV3-K70M | 1346.3376.02 | Multimodulation analysis requires R&S FSV3-K70 |
| R&S FSV3-K70P | 1346.3382.02 | BER PRBS measurements requires R&S FSV3-K70 |
| R&S FSV3-K72 | 1330.5080.02 | 3GPP FDD (WCDMA) BS measurements, incl. HSDPA and HSDPA+ |
| R&S FSV3-K73 | 1330.5097.02 | 3GPP FDD (WCDMA) MS measurements, incl. HSUPA and HSUPA+ |
| R&S FSV3-K91 | 1330.5100.02 | WLAN 802.11a/b/g measurements
requires R&S FSV3-B40, R&S FSV3-B200 or R&S FSV3-B1000 to support signal analysis bandwidths > 28 MHz |
| R&S FSV3-K91N | 1330.5139.02 | WLAN IEEE802.11n measurements requires R&S FSV3-K91 |
| R&S FSV3-K91AC | 1330.5116.02 | WLAN IEEE802.11ac measurements requires R&S FSV3-K91 |
| R&S FSV3-K91AX | 1346.3399.02 | WLAN IEEE802.11ax measurements requires R&S FSV3-K91 |
| R&S FSV3-K91P | 1330.5122.02 | WLAN IEEE802.11p measurements requires R&S FSV3-K91 |
| R&S FSV3-K100 | 1330.5145.02 | EUTRA/LTE FDD BS measurements |
| R&S FSV3-K101 | 1330.5151.02 | EUTRA/LTE FDD UE measurements |
| R&S FSV3-K102 | 1330.5168.02 | EUTRA/LTE BS MIMO measurements requires R&S FSV3-K100 or R&S FSV3-K104 |
| R&S FSV3-K103 | 1330.7231.02 | EUTRA/LTE-Advanced UL measurements requires R&S FSV3-K101 or R&S FSV3-K105 |
| R&S FSV3-K104 | 1330.5174.02 | EUTRA/LTE TDD BS measurements |
| R&S FSV3-K105 | 1330.5180.02 | EUTRA/LTE TDD UL measurements |
| R&S FSV3-K106 | 1346.3418.02 | EUTRA/LTE NB-IoT DL measurements |
| R&S FSV3-K144 | 1330.7219.02 | 3GPP 5G-NR DL measurements |
| R&S FSV3-K145 | 1330.7225.02 | 3GPP 5G-NR UL measurements |
| R&S FSV3-K147 | 1346.4250.02 | 3GPP 5G-NR combined DL ACLR/SEM/EVM measurements requires R&S FSV3-K144 |
| R&S FSV3-K544 | 1346.3630.02 | User-defined frequency correction with SnP file (corrects frequency response-amplitude and phase-of measurement setup) |
